Home
>
News
>
Industry News
Industry News
In the process of using the magnetic bar in contact with the fluid, the internal magnetic energy will have some irreversible losses. The loss exceeds 30% of the strength or the iron sheet covered on the surface. When the stainless steel pipe is worn and broken, the magnetic bar needs to be replaced at this time, so as not to let the magnet leak out. The magnetic bar continues to work, the magnets are generally relatively brittle, and the surface is also coated with some oil, which is relatively polluting to the environment. Domestic magnetic rod manufacturers generally can work for 1-2 years under heavy load and 7-8 years under light load. Mainly used in plastics, food, environmental protection, filtration, chemical industry, electric power, building materials, ceramics, medicine, powder, mining, coal and other industries.
The inside of the long magnetic rod uses a permanent magnet as the magnetic source, the surface is wrapped with a stainless steel tube, and both ends are welded and sealed. Using its magnetic force to sort out fine iron impurities from the material, it can improve the purity of the material and protect the downstream equipment. The strong magnetic bar can be used alone in the feeding port, the discharging port or the conveying pipeline, and can also be used to make a complete set of magnetic grid, drawer type iron remover, fluid iron remover and rotary iron remover.
Strong magnetic bar optional features:
1. Surface material: SUS304, SUS316L;
2. Magnetic strength grade: 3000GS, 6000Gs, 8000Gs, 10000Gs, 12000GS, 13000GS;
3. Working temperature <: 80°C, 100°C, 120°C, 150°C, 180°C, 200°C, 300°C;
4. End face design: threaded holes, screws, rings, cylinders, tapered tips, etc.;
5. Size: standard diameter 25mm, length within 2500mm; other commonly used diameters D16, D19, D20, D22, D28, D32, D38, D50, D76, D100; can also be made into a square-shaped magnetic rod, the common size is 19 *19mm, 25*25mm, 50*25mm, etc.
6. Other special requirements can also be customized according to customized requirements.
The inside of the long magnetic rod uses a permanent magnet as the magnetic source, the surface is wrapped with a stainless steel tube, and both ends are welded and sealed. Using its magnetic force to sort out fine iron impurities from the material, it can improve the purity of the material and protect the downstream equipment. The strong magnetic bar can be used alone in the feeding port, the discharging port or the conveying pipeline, and can also be used to make a complete set of magnetic grid, drawer type iron remover, fluid iron remover and rotary iron remover.
Strong magnetic bar optional features:
1. Surface material: SUS304, SUS316L;
2. Magnetic strength grade: 3000GS, 6000Gs, 8000Gs, 10000Gs, 12000GS, 13000GS;
3. Working temperature <: 80°C, 100°C, 120°C, 150°C, 180°C, 200°C, 300°C;
4. End face design: threaded holes, screws, rings, cylinders, tapered tips, etc.;
5. Size: standard diameter 25mm, length within 2500mm; other commonly used diameters D16, D19, D20, D22, D28, D32, D38, D50, D76, D100; can also be made into a square-shaped magnetic rod, the common size is 19 *19mm, 25*25mm, 50*25mm, etc.
6. Other special requirements can also be customized according to customized requirements.